RothGreaves standard and custom coil winders offer features like high-rpm motors, electronic spool tensioners, analog pitch compensators, EasyWind WindowsTM based software with full CNC coil winding control, multi-filar payout racks, and hot air torches. On-site training is available.
RGA Automatic Coil Wire Winders run unattended to produce high- quality coils in large volumes. These coil winders are available in single arbor or double arbor configurations as well as custom lengths.
RGA Manual Coil Winders are available in standard sizes as well as custom sizes to suit your coil requirements. All models offer unique features not available from other manufacturers including EasyWind WindowsTM software.
RGA Mini-Winders are the same full-featured machines as the larger models and are perfect for R&D applications or light production.
All RothGreaves winders use the same EasyWind Software.
RGA Arbor-Puller winders automatically release the coils from the arbor after winding and coil cutting is built right into the machine.
RGA Stacked Bed Winders combine two fully independent winders in one machine to save floor space. Each winder has all the features of our single arbor models while providing twice the throughput.
RGA Side-Winder is designed to transfer a coil directly to a mandrel without the coil springing back off the mandrel. Perfect for catheter manufacturing where the coil is formed at the mandrel diameter.
Features and Specifications for Automatic 80″ Winder:
– Dimensions………….135″ Length x 35″ Width x 38″ Height
– Power requirements: ………….. 220 VAC 20Amp Single Phase 50/60Hz
– Pneumatic requirements: …………..80 psi @ 5.0 cfm for models without hot air torch
– Motor type and size:…………60 mm brushless servo, 80 mm brushless servo for carriage
– Winding speed max:………….6000 rpm
– Drive amp size:………….400 watt, 750 watt
– Controller type:………….PCI-2 CNC multi-axis servo controller
– Interface: ……………17″ touch screen monitor and track ball keyboard
– Wire tensioning:……..Electronic (range of sizes available)
– Arbor tensioning:…………Pneumatic (on tail stock)
– Chuck size/type:…………..1/8″ Albrecht tailstock/Custom collets for spindle
– Coil cutter: …………..Pneumatic with side cutting blades
– Manual jog controller:………..Pendant with joy stick operation all axis
– Computer Operating System: ……….Microsoft Windows XP
Available Options for Winding Machines:
– Hot air torch (1200 F Maximum)
– Electronic spool brakes (3 oz-in, 11 oz-in, 35 oz-in, 85 oz-in, 140 oz-in)
– Pneumatic arbor tension (20 lbs, 85 lbs, 130 lbs)
– Electronic arbor tension with force feedback (0-10 lbs, 0-25 lbs, 0-50 lbs)
– Arbor dampers (flat faced contact and roller style)
– Heavy duty wheels with leveling feet
– Muli-Filar spool racks
– Payout angle compensator (with or without protractor)
– Safety light curtain and/or safety covers
– On site training
